一、 技术指标：Technical indicators
|
型 号 |
9055A
|
9070(A)
|
9140(A)
|
9240(A)
|
|
|
内胆尺寸(mm) The tank size（mm）
|
420×340×350
|
450×400×450
|
550×450×550
|
600×550×750 |
|
|
外形尺寸(mm) Overall |
710×590×520 |
740×580×630 |
830×650×730 |
880×770×825 |
|
|
电源电压 The power supply voltage |
AC220V 50Hz /60 Hz |
||||
|
控温范围 Temperature control range |
RT+10～290℃ |
||||
|
恒温波动度 Thermostatic fluctuation |
±1℃ |
||||
|
温度分辨率 Temperature resolution |
0.1℃
|
||||
|
定时时间 Regular time |
0～9999min
|
||||
|
测试孔 Test hole |
选购可定制直径Ф50mm测试孔， Customizable Ф 50 mm diameter test hole of choose and buy
|
||||
|
额定功率 Rated power |
870W |
1570W |
2070W |
2470W |
|
|
内箱材质In the cases of material |
304#镜面不锈钢304# mirror stainless steel |
||||
|
外箱材质Carton material |
外箱冷板静电喷涂Cold plate of outer box is sprayed by static electricity |
||||
二、温控系统：
1、温度范围：室温—250度（可任意设定所需温度）
2、温控制器：采用RKC 70型温度控制器，LED做数字显示
设定，PID自动演算修正设定，配0.6芯电热偶及接触器输出
从而保证温度控制更加稳定和更精准。
3、温度器精度：±5℃
4、温度均匀度：±5℃（加热空炉上中下测试）
5、加 热 器：采用Φ11mm散热式干烧型发热管（采用进口的电阻丝及高温石
英砂制作），发热管装置在炉内两旁
三、运风控制系统：
1、运风电机：1台加强轴型烤箱专用电机及配置强力型多翼风轮
2、运风方式：在炉体两侧强制出风，顶部回风循环。
在炉体顶部配置排气排风烟囱，让产品在烘烤时，及时排出废气烟雾
四、炉体结构及用料：
1、炉体设计成：单开门。
2、内箱采用0.8mm不绣钢板制作。
3、外箱采用1.mm厚A3冷板加工成型后防锈处理，喷电脑白色。
4、保温材料:采用西斯尔80K环保高温棉，保温厚度为80mm
5、门边密封：采用耐高温硅胶迫紧密封
五、控制电器使用材料：
温度表：1个（台湾RKC）
电热偶：1条（0.6芯K型）
时间制：1套（够温计时）
运风电机: 1台（600W）
运风风轮: 1个12寸
Ii. Temperature control system
1. Temperature range: room temperature -- 250 ° c (the required temperature can be arbitrarily set)
2, temperature controller: RKC 70 temperature controller, LED digital display
Set, PID automatic calculation and correction set, with 0.6 core electrothermal couple and contactor output
To ensure more stable and accurate temperature control.
3. Accuracy of the thermostat: ±5℃
4. Temperature uniformity: ±5℃ (upper, middle and lower test of heating empty furnace)
5, add heat exchanger: adopt Φ 11 mm cooling type dry type heat pipes (high temperature and the resistance of the wire imported stone
The heating pipe is arranged on both sides of the furnace
Iii. Transportation risk control system:
1. Wind motor: a special motor for strengthening shaft type oven and a powerful multi-wing wind wheel are equipped
2. Mode of air transportation: forced air out on both sides of the furnace body and air back circulation on the top.
At the top of the furnace body is equipped with exhaust chimney, so that when the product is baking, exhaust fumes can be discharged in time
Iv. Furnace structure and materials:
1. The furnace body is designed as: single door.
2. The inner box is made of 0.8mm unembroidered steel plate.
3. The outer box shall adopt 1. Mm thick A3 cold plate for rust prevention after forming, and spray the computer white.
4. Thermal insulation material: it is made of CSR 80K environmental friendly high temperature cotton with a thermal insulation thickness of 80mm
5, door side seal: high temperature resistant silicone forced tight seal
5. Materials for controlling electrical appliances:
Temperature meter: 1 (Taiwan RKC)
Electric couple: 1 (0.6-core k-type)
Time system: 1 set (enough temperature timing)
Wind motor: 1 set (600W)
Wind turbine: 1 12"