产品详情
  • 产品名称:test chamber

  • 产品型号:XHD-9055
  • 产品厂商:深圳弘基嘉
你添加了1件商品 查看购物车
简单介绍:
High temperature aging test box can be used to assess and determine electrical, electronic, automotive electrical appliances, materials and other products, plastics, toys, storage and use in high temperature environment conditions adaptability
详情介绍:

一、        技术指标:Technical indicators

905**


9070(A)


9140(A)


9240(A)


内胆尺寸(mm)

The tank sizemm



420×340×350


450×400×450


550×450×550


600×550×750

外形尺寸(mm)

Overall

710×590×520

740×580×630

830×650×730

880×770×825


电源电压

The power supply voltage

AC220V  50Hz /60 Hz

控温范围

Temperature control range

RT+10290℃(低控制温度为50℃)

恒温波动度

Thermostatic fluctuation

±1

温度分辨率

Temperature resolution

0.1


定时时间

Regular time

09999min

测试孔

Test hole

选购可定制直径Ф50mm测试孔,

Customizable Ф 50 mm diameter test hole of choose and buy

额定功率

Rated power

870W

1570W

2070W

2470W

内箱材质In the cases of material

304#镜面不锈钢304# mirror stainless steel

外箱材质Carton material

外箱冷板静电喷涂Cold plate of outer box is sprayed by static electricity

Electric voltage: 220 v
Power: 2500 w
Wind power: 0.5hp /370W
Operating current: 10A
Control mode: reach the required temperature and start timing
Ii. Temperature control system
1. Temperature range: room temperature -- 250 ° c (the required temperature can be arbitrarily set)
2, temperature controller: RKC 70 temperature controller, LED digital display
Set, PID automatic calculation and correction set, with 0.6 core electrothermal couple and contactor output
To ensure more stable and accurate temperature control.
3. Accuracy of the thermostat: ±5℃
4. Temperature uniformity: ±5℃ (upper, middle and lower test of heating empty furnace)
5, add heat exchanger: adopt Φ 11 mm cooling type dry type heat pipes (high temperature and the resistance of the wire imported stone
The heating pipe is arranged on both sides of the furnace
Iii. Transportation risk control system:
1. Wind motor: a special motor for strengthening shaft type oven and a powerful multi-wing wind wheel are equipped
2. Mode of air transportation: forced air out on both sides of the furnace body and air back circulation on the top.
At the top of the furnace body is equipped with exhaust chimney, so that when the product is baking, exhaust fumes can be discharged in time
Iv. Furnace structure and materials:
1. The furnace body is designed as: single door.
2. The inner box is made of 0.8mm unembroidered steel plate.
3. The outer box shall adopt 1. Mm thick A3 cold plate for rust prevention after forming, and spray the computer white.
4. Thermal insulation material: it is made of CSR 80K environmental friendly high temperature cotton with a thermal insulation thickness of 80mm
5, door side seal: high temperature resistant silicone forced tight seal
5. Materials for controlling electrical appliances:
Temperature meter: 1 (Taiwan RKC)
Electric couple: 1 (0.6-core k-type)
Time system: 1 set (enough temperature timing)
Wind motor: 1 set (600W)
Wind turbine: 1 12"
Contactor: 1 set (10A)
Power switch: 1 (12A)
Power supply, heating, timing, control twist, switch: 1 set
Vi. Safety system:
1. Motor phase loss over-current protection device (when the motor is overloaded, cut off the heating power to prevent the product from being damaged)
2, control circuit short circuit and overload protection, when the circuit short circuit or other faults cut off the power, to protect the safety of the motor
Vii. Working principle of the machine:
1, start the power off →2, open the motor air switch →3, open the heating switch →4, set the station
Required temperature →5, start heating →6, automatically calculate the baking time when the temperature reaches the beginning →7, start beeping when the baking time reaches, and cut off the heating power

姓名:
电话:
您的需求: