Suitable for rubber plastics, light industry textile, building doors and Windows, composite materials, wires and cables, auto parts, power machinery, scientific research institutions, small terminals, etc. This machine is an electric tension testing machine, which drives the bearing and rod forward or backward with a precision speed-regulating motor drive. After the specimen is stretched, the tens
Main technical index
1. Maximum tensile strength: 50kg (machine capacity)
2. Stroke: 300mm (excluding fixture stroke)
3. Power: about 40W
4. Weight: 30㎏ (approx.)
5. Measurement accuracy: ±1%
6. Speed range: 20-300mm/min adjustable
7. Control: stepless speed regulation (automatic, inching function)
8. Protection device: displacement protection
9. Overall dimension (length * width * height) : 750*260*360mm
(digital display tension meter) function and configuration
1. Standard fixture: 2
2. Power cord: 1
3. Instruction: 1 copy
4. Pointer tension meter: 1 set
5, pull meter block 1
6. Warranty card: 1 copy
7. Quality guarantee: 1 copy
8. Electric horizontal tension testing machine: 1 set
9. Unit: N, KG
3. Schematic diagram of the whole machine:
Iv. Usage tips:
1. Unplug the power switch to the "ON" position.
2. Adjust the distance between left and right bars to make the distance between clamps appropriate.
3. Adjust the "speed twist" to make the speed meet the requirements.
4. Clamp the left end of the specimen with the left fixing fixture, stop the machine when the horizontal right bar is at an appropriate distance, and then clamp the right side of the specimen with the right clamping fixture.
Clear pointer table data (minus its gross weight) before test.
When everything is ready, press up or down to push the tension test will start the test.
Pull the power to the "OFF" position after the test.
(note: when the specimen straightened don't let the tension meter stress is too large ≥0.01㎏.
1. The transmission mechanism and moving parts of the machine should be lubricated and fixed regularly.
2. This machine is a precision test equipment. Please handle it carefully if you want to move it.
3. Control the stroke when operating the machine to prevent the left clamp from colliding with the right fixture.
4. The parts of slide rod and screw should be kept clean to avoid dust, and lubricating oil should be added frequently.
5. Do not place foreign bodies on the fixture platform to avoid damage.
6. Do other work of equipment.
7. Machine base contains 1 digital display tension meter (tension meter)
NO. : Outgoing Date: Pakager:
NO. The Name of Quantity
1 electric horizontal tension testing machine
2 smelt 1 set
3 tension meter block 1
4 digital tension gauge 50KG 1 set
One power cord
6 one manual
One copy of quality guarantee
One copy of warranty card